- Article
- 16 minutes to read
Solution Health Hub allows you to get a better picture of the state of your environment and detect issues with your Dynamics 365 environment. The Solution Health Hub runs rules within an instance to validate the environment's configuration, which might change over time through natural system operations. Some of the rules are specific to Dynamics 365 Field Service and you can run the rules on demand when you encounter an issue. Some rules automatically trigger when Field Service is installed or updated. Regularly run the Field Service ruleset to monitor the health of your environment.
Here are a few common issues the Solution Health Hub detects:
- If critical Field Service processes are deactivated
- If processes that will cause an upgrade to fail are assigned to disabled users
- Customized web resources that will later lead to runtime issues
In addition to running Solution Health Hub, check out best practices for customizing Dynamics 365 Field Service andrunning Solution Checker to improve scripts, plugins, HTML, workflows, etc.
Prerequisites
- Field Service v8.4.0.338+ (Unified Interface) or v7.5.7.87+ (Web)
- The Solution Health Hub extends the Power Apps checker to ensure continued healthy operation of an environment.
Run a health check
To run an analysis job for Field Service:
- Open the Solution Health Hub app.
- Select Analysis Jobs and create a new analysis job.
- When the dialog box opens, select Field Service.
- Select OK and the analysis job will begin.
View health check results
Once you run the analysis job, you will be directed to the overview page, which will automatically refresh when the run has finished. See the following screenshot for an example overview of a run.
When running an analysis job, you will see a Return Status for each rule, which indicates whether the rule passed, failed, or there was a configuration error. Rules also return a severity if they are failing, which shows how severe each problem is. All possible return status outcomes are listed in the following table.
| Rule return status | Recommendation |
|---|---|
| Fail | Highlight specific failures within the system; fix the rule as suggested. |
| Warning | Be aware of the implications mentioned in the rule message. |
| Pass | Indicates that there are no problems with this rule. All rules should be in this state. |
Agreement Work Order Generation
Severity: High
What it checks
Verifies that all work orders that were supposed to be generated over the last seven days were correctly generated by agreements.
Why it fails
There are agreement recurrences that haven't been processed correctly, and work orders haven't been generated that should have been.
How to fix
Identify the reason the work order was not generated, along with the cause of failure, and address that. Then regenerate the record generation by changing the agreement status back to "estimate," then to "active" again.
Severity: High
What it checks
Checks for failing workflow related to agreement, returns agreement booking setup, or agreement invoice setup record of failure.
Why it fails
This rule fails if there is a failing workflow related to an agreement record.
How to fix
This rule provides an automated resolution step that can be resolved via the Resolve button in the Solution Health Hub form for this rule failure. Alternatively, they can be viewed individually and resolved using the same steps for the "check failing workflow related to agreement" rule.
Check for removed form libraries
Severity: Medium
What it checks
Detects if there are Field Service forms in the system that missing Field Service libraries.
Why it fails
Field Service forms depend on its libraries to function properly. Without this, some functionality might be broken.
Note
This is currently known to show a false-positive failure on ‘Price Level’ form. This will be addressed in an upcoming release.
How to fix
Add back the missing libraries to the form. You might get the list of required libraries by comparing to another form of the same entity or on other org. Reach out to support for additional assistance.
Customizations on 'Connected Field Service' app module
Severity: Low
What it checks
Checks whether there are customizations to the Connected Field Service app module that is being deprecated and shouldn’t be customized.
Why it fails
If there are any customizations on the Connected Field Service app module in the organization, this check fails.
How to fix
Remove customizations from the Connected Field Service App module.
Customized option sets
Severity: High
What it checks
Detects whether any option set in Field Service that is not supposed to be customized has been customized. Customizing option sets can lead to unexpected behavior.
Note
This is currently known to show a failure on msdyn_billingtype even when it was not customized, and happens when the Project Service Automation solution is also installed. This rule was updated to address this known failure.
Why it fails
Fails if there are any customizations on any of the default Field Service options sets. Additions to the option sets do not count as failures, only modifications to the options within the option sets.
How to fix
Manually Remove customizations from the Field Service Option sets
Customized web resources
Severity: High
What it checks
Detects which web resources have been customized by solutions that are not part of the Field Service package. This will lead to those web resources not being updated on upgrade and can lead to different functionality issues after upgrade.
Why it fails
Fails if any web resource has been customized by a solution that is not part of the Field Service package.
How to fix
Remove the customizations via the solution layers UI on the web resources that have been customized. When Field Service upgrades, the web resources can be correctly upgraded.
Delete Field Service unique numbers workflow check
Severity: Low to medium
What it checks
Validates if the bulk delete auto number workflow runs correctly.
Why it fails
Fails if the delete unique number workflow has been failing.
How to fix
This rule provides an automated resolution step that can be resolved via the Resolve button in the Solution Health Hub form for this rule failure.
Deleted processes
Severity: High
What it checks
Verifies that there are no deleted processes.
Why it fails
Fails if any of the out of the box processes for Field Service are deleted.
How to fix
Contact support.
Deleted Sdk message processing steps
Severity: High
What it checks
Verifies that there are no deleted SDK message processing steps.
Why it fails
Fails if any of the shipped Field Service SDK message processing steps have been deleted from the system.
How to fix
Contact support.
Deleted web resources
Severity: High
What it checks
Checks whether there are any deleted web resources.
Why it fails
Fails if any of the shipped Field Service web resources have been deleted from the system.
How to fix
Contact support.
Disabled Sdk message processing steps
Severity: High
What it checks
Checks whether there are anySDK message processing stepsthat are disabled. Disabled SDK message processing steps will lead to incorrect behavior when using Field Service.
Why it fails
Fails if any of the Field Service SDK message processing steps are disabled.
How to fix
Enable the disabled SDK message processing steps.
Severity: High
What it checks
Checks that the Field Service booking setup metadata record exists correctly in the system. If this record is missing, scheduling functionality might not work as expected.
Why it fails
Fails if the Field Service booking setup metadata record does not exist in the system.
How to fix
Contact support.
Field Service Settings
Severity: High
What it checks
Checks that theField Service settingsrecord exists correctly in the system.
Why it fails
Fails if the Field Service settings record does not exist or is not configured properly.
How to fix
The system will recreate this record if it's found to not exist during the course of normal usage of Field Service. If the record is not automatically regenerated, contact support.
Forms missing execution context
Severity: High
What it checks
Detects if there are any forms in the system that have event handlers referencing Field Service libraries without passing the execution context parameter.
Why it fails
Field Service code expects the execution context parameter to be passed in the OnLoad event handler. If this value is missing. it might cause errors while using the form.
Note
The most common scenario where this rule presents a failure is when a copy of one of the out-of-the-box forms is present (Field Service versions earlier than 8.X) and then Field Service is upgraded. In such scenarios, these copied forms from earlier versions of Field Service would be missing the ExecutionContext parameter in these non-out-of-the-box forms.
How to fix
Open the form in the designer > double-click on each OnLoad event handler > enable "pass execution context as first parameter" > save and publish the form.
Incomplete Field Service upgrade
Severity: Low
What it checks
Detects whether a Field Service upgrade has started but not successfully completed.
Why it fails
Fails if a Field Service upgrade has started but not successfully completed.
How to fix
Restart the Field Service upgrade. Once the upgrade succeeds, this rule will return a pass. If upgrade fails again, contact support.
Process definitions in draft status
Severity: High
What it checks
Checks whether there are any process definitions in draft status. If there are processes in draft status, Field Service will not work correctly.
Why it fails
Fails if there are process definitions found in the draft state
Note
Field Service modern flows can cause failures. This rule was updated to validate based on enhanced background processing setting in UR 24; in versions prior to UR 24, it may incorrectly fail on business process flow (BPF) type records.
How to fix
Reactivate the process definitions so they are not in draft state.
Process definitions owned by disabled users
Severity: Medium to high
What it checks
Checks whether there are any process definitions in the system that are assigned to users that are disabled. If that’s the case, upgrade will fail.
Why it fails
Fails if there are any process definitions in the system that are assigned to disabled users, which can cause upgrades to fail.
Note
Validates based on the enhanced background processing setting in UR 24.
How to fix
For workflows: Change the owner of process to an active user.
Universal Resource Scheduling version compatibility check
Severity: Low
What it checks
Verifies that the current installed version of Field Service is compatible with the version of Universal Resource Scheduling.
Why it fails
Fails if the Universal Resource Scheduling solution installed in the org is not compatible with the installed version of Field Service. This can happen if another package that contains the Universal Resource Scheduling solution has been installed that updates the version of the Universal Resource Scheduling solution.
Note
The fail status for this rule was changed to "Warning" instead of "Fail" to align with the low severity for this rule in UR 23 release.
How to fix
The warning message displayed by the rule will indicate which solution needs to be upgraded in order to be compatible with Field Service.
Verify auto numbering is opted
Severity: Low
What it checks
Verifies if autonumbering is opted in for the org. We recommend customers use the new autonumbering functionality to ensure uniqueness in numbering of Field Service tables.
Why it fails
Fails if autonumbering is not opted-in for the org.
How to fix
Opt into autonumbering in Field Service by going to Settings > Field Service settings > # Opt-In to Auto-Numbering (in the top command ribbon).
Verify Field Service and Project Service Automation solutions are compatible
Severity: Low
What it checks
Verifies that the current installed version of Field Service is compatible with the version of Project Service Automation installed.
Why it fails
Fails if the version of Project Service Automation solution installed in the org is not compatible with the Field Service solution installed in the org.
How to fix
The warning message displayed by the rule will indicate which solution needs to be upgraded in order to be compatible with Field Service.
Waiting workflow instances owned by disabled users
Severity: High
What it checks
Detects waiting workflow instances that are assigned to disabled users. These will fail to correctly generate the records that they are supposed to generate.
Why it fails
Fails if there are workflow instances in the suspended state with the reason of Waiting that are assigned to disabled user accounts.
How to fix
Retrigger the workflow. Refer to general documentation or contact support.
Check if required level of fields is modified
Severity: High
What it checks
This rule checks if the required level of the system field on the form is modified
Why it fails
If the required level of the system field (that is, Application Required field/ OOB Field) on the Work Order and Agreement form is modified.
How to fix
Go to customization -> Entities -> Work Order /Agreement -> Fields -> Double-click on field for which required level need to reset -> Select field requirement -> Business Required.
Note
This rule is implemented for the out-of-the-box required field on the Work Order and Agreement only.
Checks For Active Agreements Having Past End Dates
Severity: High
What it checks
Rule validates for Agreements where System Status as Active, but the end date is in the past [System Status should be Expired if the end date has passed].
Why it fails
Rule fails if system status of an Agreement is Active even though its end date has passed [end date with a past date].
How to fix
Providing option to resolve if there are any agreement with system status active and end with past date. Select the analysis result, review the agreements, and select the resolve button.
Additional notes and limitations
- Rule validates for the agreements having end date in last 90 days.
- Rule considers top 5000 agreements having system status as Active and end date hit.
- Only Agreements having agreement booking setups and Agreement booking dates are considered for validation.
Check For Revision Mismatch on Agreement Booking Date with Agreement Booking Setup
Severity: High
What it checks
Rule validates whether Agreement Booking Dates’ revision matches the revision of the corresponding Agreement Booking Setups.
Why it fails
The rule fails if there is a mismatch with the revision value of agreement booking date and its corresponding agreement booking setup. This rule considers only Active Booking Date records whose booking date is not older than 90 days (that is, last three months active booking dates).If there is a mismatch then the system might not generate a work order for that booking date.
How to fix
Contact support.
Additional notes and limitations
Rule considers top 5000 active ABD records in last three months based on booking date (Latest)
Check For Revision Mismatch on Agreement Invoice Dates with Agreement Invoice Setups
Severity: High
What it checks
Rule validates Agreement Invoice Dates’ Revision matches the revision of the corresponding Agreement invoice setups.
Why it fails
Rule fails if there is a mismatch with the revision value of agreement invoice date and its corresponding agreement invoice setup. This rule considers active Agreement Invoice Date records whose invoice date is not older than 90 days (that is, last three months active invoice dates).If there is a mismatch, then the system might not generate an invoice for that invoice date.
How to fix
Contact support.
Additional notes and limitations
Rule considers top 5000 active AID records in last three months based on invoice date (Latest)
Privilege check for Agreement Booking Setup owners
Severity: High
What it checks
Checks that agreement booking setup record owners have required the privileges to create work orders.
Why it fails
If agreement booking setup owners don’t have below privileges.
1.prvCreatemsdyn_workorder
How to fix
Assign the above privileges to respective agreement booking setup record owners.
Privilege check for Agreement Invoice Setup owners
Severity: High
What it checks
Checks for agreement invoice setup record owners have required privileges to create invoice.
Why it fails
If agreement invoice setup owners don’t have below privileges.
1.prvCreateInvoice
How to fix
Assign the above privileges to respective agreement invoice setup record owners.
Recurrence on Agreement Booking Setup
Severity: High
What it checks
If recurrence setting is configured or not on an agreement booking setup and, if so, it checks if it is a valid recurrence setting value.
Why it fails
If an agreement has System Status as Active and its Agreement booking setup record has Auto Generate WO set to Yes, but recurrence setting is not configured.If an agreement has System Status as Active and its Agreement booking setup record has Auto Generate WO set to Yes, but recurrence configured on it is not valid.
How to fix
Configure a valid recurrence on Agreement Booking Setup.Go to Agreement > Agreement Booking Setup > Booking Recurrence button on command bar.
Latitude and Longitude values on account record
Severity: Low
What it checks
Checks whether latitude and/or longitude values are there on an account record or not.
Why it fails
If either latitude or longitude or both are not present on an account record.
How to fix
Check if the address on the account form is provided. If so, then geocode the account by selecting the geocode button on the command bar of the account form.
Verify mobile user security roles
Severity: High
What it checks
Checks whether frontline workers who have access to the Field Service (Dynamics 365) mobile app are assigned the Field Service resource role and the Field Service resource field security profile.
Why it fails
When a frontline worker has access to the Field Service (Dynamics 365) mobile app without Field Service resource role and/or the Field Service resource field security profile
Note
Business unit is shown in the message when more than one business unit is present in the organization. A user who is part of multiple business units who does not have the Field Service Resource role or security profile may be flagged for each business unit of which they are a member.
How to fix
Add Field Service resource security role and field security profile to the user. For more information see, see this article on setting up frontline workers.
Check if forms have unhealthy customizations
Severity: High
What it checks
For all work order forms, this rule checks if the number of subgrid controls or lookup controls exceed the limit (4 subgrids or 20 lookups), which may impact performance. This rule triggers a notification to system administrators stating which forms have too many subgrid controls or lookup controls.
A subgrid control is a table in the form that lists records of another table. An example of a subgrid control is the work order product subgrid control on the work order form that is included out-of-the-box with Field Service.
A lookup control is a field on the form that searches the records of another table and allows you to select one or more records to populate the field.
Why it fails
This rule fails if the default tab (the first tab on the form) of any work order form has more than either 4 subgrids controls or 20 lookup controls. Form load performance is impacted by the number of controls on the default tab of the form, so it is strongly suggested to minimize the number of controls there.
How to fix
Reduce the number of lookup fields and subgrid controls on the default tab (the first tab on the form) by moving them to other tabs on the form (or hiding them from the form if not needed).
Check out more ways to Improve form load time.
FAQs
What is Microsoft Solution Health Hub? ›
Solution Health Hub allows you to get a better picture of the state of your environment and detect issues with your Dynamics 365 environment. The Solution Health Hub runs rules within an instance to validate the environment's configuration, which might change over time through natural system operations.
What are the solution patch and clone in Dynamics 365? ›You can create a patch for a parent solution and export it as a minor update to the base solution. When you clone a solution, the system rolls up all related patches into the base solution and creates a new version.
Is Microsoft feedback hub necessary? ›Feedback Hub is an app made by Microsoft, available by default in Windows 10 and Windows 11. Its sole purpose is to offer you an easy way to give feedback to Microsoft about Windows, its features, and its components. However, many users might have the same suggestions or encounter the same problems.
Is Dynamics 365 being discontinued? ›The Microsoft Dynamics 365 (Preview) app for Windows was deprecated on June 20, 2022. The app is no longer supported.
How do I run a solution checker in Dynamics 365? ›Run the solution checker
Sign in to Power Apps. In the left pane, select Solutions. Next to the unmanaged solution that you want to analyze, select ..., point to Solution checker, and then select Run. The status pane located on the upper right of the Solutions page displays Solution checker running.
We have published the 2022 release wave 1 plans for Dynamics 365, a compilation of new capabilities that will be released April 2022 through September 2022.
How do I Debug dynamics? ›Press F5 to start the application for debugging, or, on the Debug menu, click Start Debugging. It's important that you start the application in one of these ways. If you don't, the Visual Studio debugger won't start, so you won't hit any of the breakpoints you've set.
How do I Debug a D365 plugin? ›In your Visual Studio project, select Debug > Attach to Process…. Select the PluginRegistration.exe process and click Attach. You should see that the Plug-in Registration tool is now running in debug mode. In the Replay Plug-in Execution dialog, click Start Execution.
What is case management in Dynamics 365? ›Case management is the core record that tracks individual customer service issues across channels and agents over time. Customers want to have a long and happy relationship with brands over time, and throughout that relationship they may have several support inquiries through more than one support channel.
What is the difference between the clone stamp tool and patch tool? ›Using the Patch tool is smarter than using the Clone Stamp tool to clone one area on top of another because, unlike the Clone Stamp tool, the Patch tool attempts to match the texture, lighting, and shading of the area that you're trying to fix.
What is the purpose of clone option? ›
The Clone Type option specifies whether to create a clone linked to the source VM or to create a fully independent clone: Full Clone: Copies all dependent disk images to the new VM folder. A full clone can operate fully without the source VM.
How do I scan with HealthHub? ›Please ensure that your smartphone's “Location Services” function is turned on, and that you are scanning the QR code with the 'Scan' function of your Healthy 365 app. Tap the “Scan” icon on your Healthy 365 app to launch the camera function. Point the camera at the QR code to do the scan.
How do I access my health data? ›NSW Health clinicians can directly access HealtheNet via their local electronic medical record system. GPs and patients can use My Health Record to view selected NSW Health information shared via HealtheNet. eHealth NSW manages HealtheNet and provides training and resources for the clinicians that use it.
How do I get my HealthHub QR code? ›In the parks, the QR codes are usually located on lamppost banners. To determine if the QR code is legit, simply launch the Healthy 365 mobile app, tap on the camera icon and scan the QR code.
Can I disable Feedback Hub? ›How to disable Feedback Hub prompts in Windows 10. If you're using Windows 10, open Settings (Windows + I). Then, click or tap the Privacy section. In the left column, choose Diagnostics & feedback, found in the Windows permissions section.
Is it okay to disable Feedback Hub? ›There are times when it is better to disable certain Windows features for the sake of confidentiality, functionality, and ease of use. A good example is the Feedback Hub.
Does Dynamics 365 have future? ›The future projects of Microsoft Dynamics 365 will include more intelligence and cognitive services, using companies' data proactively to digitally transform businesses. Microsoft Dynamics 365 continues to evolve — the pace of change is increasing, and projects will be bigger, more complex and more fun.
What programming language is Dynamics 365? ›As we mentioned, X++ is the main programming language of Dynamics AX, now rebranded as Dynamics 365 for Finance and Operations. This programming language powers all the items and elements that you can find within this Microsoft environment.
How do I run a solution file? ›Double-click a solution file (. sln) in Windows Explorer to open it.
How many fields are there in Dynamics 365? ›Dynamics 365 gives you the ability to create three different types of fields depending on the need and type of data you want to accumulate or demonstrate. Here is a list of these fields with a brief description of their potential. One line of text: This field can include up to 4 000 characters of text.
Is Dynamics 365 a CRM or ERP? ›
Microsoft Dynamics 365 is a cloud-based business applications platform that combines components of customer relationship management (CRM) and enterprise resource planning (ERP), along with productivity applications and artificial intelligence tools.
Why is Salesforce better than Dynamics 365? ›Salesforce is generally more user-friendly in the UI department, and more customizable, but Microsoft Dynamics 365 is probably a bit easier to use for reporting. Then again, if you really want or need an on-premise deployment, a Microsoft Dynamics 365 plan is the only way to go—Salesforce is cloud-based, full-stop.
Which command is used for debugging? ›To run the program under the debugger program, use the gdb r(un) command.
How do I Debug a workflow in Dynamics 365? ›To profile a workflow activity, right-click on the Plug-in Profiler and select Start Profiling Workflow. This will open the Profiler Settings dialog which will provide the following options: Select the Workflow or Custom action that contains the workflow activity you want to debug.
What are the 4 domains of case management? ›Components of an effective case management practice. A successful case management process consists of four core components: intake, needs assessment, service planning, and monitoring and evaluation.
Why do we require clone stamp tool? ›The Clone Stamp is effective when you need to copy exact detail and color from one part of an image to another area. With the Clone Stamp tool, you can use an empty layer to keep your retouching separate from the main image. Click the Add New Layer button at the bottom of the Layers panel.
What key activates the clone stamp tool? ›The shortcut for the clone stamp for both Mac OS and Windows is S. If you can't see the tool bar on the left, make it visible using the 'Window' menu. Click on 'Tools' all the way down in the menu. For more difficult projects you will also need the 'Clone Source' panel.
What is the difference between magic tool and stamp tool? ›What is the difference between the Magic and Stamp tools? Ans. Magic tool is used to create magical effects on the painting. Stamp tool has several images that can be inserted in the canvas.
What Cannot be included in Dynamics CRM solution? ›You cannot modify any of the managed components (unless they are the default CRM fields). Deleting a managed solution will delete the customizations and the data. To remove unmanaged customizations you must delete them manually. Solutions are additive which means they don't remove customizations.
What is the difference between managed and unmanaged solutions? ›When an unmanaged solution is deleted, only the solution container of any customizations included in it is deleted. All the unmanaged customizations remain in effect and belong to the default solution. Managed solutions are used to deploy to any environment that isn't a development environment for that solution.
What are the various types of solutions in Dynamics CRM? ›
There are two types of Dynamics 365 Customer Engagement (on-premises) solutions: managed and unmanaged. A managed solution is a completed solution that is intended to be distributed and installed. An unmanaged solution is one that is still under development or isn't intended to be distributed.
How do you tell if a VM is a linked clone? ›For a linked clone, you'll find a line "CloneOf" with the parent/master information in the GUI (Virtual Machine Details), and you can also see this entry in the VM's . vmsd file.
Can I clone a VM while it is running? ›Can I clone a VM while it is running? Whether you can clone a virtual machine while it's running depends on the version of your software. VMware VirtualCenter 2.5 Update 2 and later versions allow you to perform a live cloning operation, copying a virtual machine as it runs.
What is the difference between full clone and linked clone? ›A Full Clone is a complete and independent copy of the original parent VM that operates like a brand new virtual machine. A Linked Clone is a copy of a virtual machine created and managed with the View Composer.
What is Windows PC health check app and do I need it? ›If you're currently running Windows 10, PC Health Check provides a comprehensive eligibility check for your device to ensure it meets the Windows 11 minimum system requirements. You'll get info on why your device is or isn't eligible, plus info on what you can do if your device doesn't meet the requirements.
What is CDM Microsoft? ›The Common Data Model (CDM) metadata system makes it possible for data and its meaning to be easily shared across applications and business processes. To learn more, see the Common Data Model overview. In Azure Data Factory and Synapse pipelines, users can transform data from CDM entities in both model.
What is Microsoft Health app? ›The Microsoft Health platform includes a cloud service for consumers and the industry to store and combine health and fitness data to create powerful insights. Microsoft Health will be available for consumers from the new Microsoft Health app which launches today on Android, iOS and Windows Phone.
What is Microsoft device health? ›Device Health is a Windows service that provides health information about your devices.
How do I fix the health check app on my computer? ›Press Windows + R, typecpl in Windows Run dialog, and press Enter to open the Programs and Features window in Control Panel. Find and right-click Windows PC Health Check and select Repair. After repairing it, you can restart the app to see if it can smoothly open and work on your PC.
Is PC health check automatically installed? ›This update will be downloaded and installed automatically from Windows Update. If you don't receive this automatically, go to Settings > Update & Security > Windows Update.
How to check system health using cmd? ›
In the search box on the taskbar, type command prompt, and right-click or press and hold Command Prompt (Desktop app) from the list of results. Select Run as administrator, and then selectYes. Type DISM.exe /Online /Cleanup-image /Restorehealth (note the space before each "/"), and then press Enter.
What is MDM and CDM? ›CDM is a subset of master data management (MDM). CDM as a discipline includes the people, processes and technologies an organization has in place to collect, access and organize customer data.
Why do we use CDM? ›The way the data is modelled will be different from the connected data models, but still the CDM is able to contain all the data from the connecting data models. This means there is always a one way, unambiguous translation of data from the CDM to the connecting data model and vice versa.
What is CDM in d365? ›The Common Data Model metadata system makes it possible for data and its meaning to be shared across applications and business processes such as Microsoft PowerApps, Power BI, Dynamics 365, and Azure.
How do I install Microsoft health Tools? ›Via Settings
Step 1: Press the Windows + I keys at the same time to open the Settings application. Step 2: Click Apps. Under Apps and Features, search for Microsoft Update Health Tools.
Microsoft Health Care Benefits
Microsoft offers Health, Vision, and Dental insurance at no cost to the employee. Additionally, they offer the ability to participate in FSA and HSA programs for employees to set aside pre-tax dollars for medical expenses.
Read more about Health 365. An app for New Zealanders to access the ManageMyHealth patient portal to do things like view your lab results, book appointments and request repeat prescriptions. Not all features are automatically enabled. Each GP practice chooses what features to enable.
Can I remove device health services? ›Open the Device Health App. From the menu, select Preferences. Select Uninstall. Enter your password if prompted.
How do I check Windows health? ›In the search box on the taskbar, type Windows Security, and then select it from the results. Select Device performance & health to view the Health report.