section title
- 920010756
- info@tabseergroup.com
-
SASO Certificate of Conformity (CoC)
The SASO Certificate of Conformity (CoC), is a requirement for all regulated products exported to Saudi Arabia to ensure that they comply and conform to the relevant technical regulations covered by the Saudi Standards, Metrology and Quality Organization (SASO). It ensures that the product meets the Kingdom 2030 vision objectives in regards to developing the economy and trade methods that provide a quality lifestyle for Saudi citizens.
SASO CoC
Issuance via Saber
Since the Saudi Product Safety Program “SALEEM” was launched-with the aim of providing a conformity assessment process with a more accessible and easier tool to verify and issue certificates of conformity to imported products. SASO CoC issuance was transferred to the new electronic platform “Saber”.
Saber became linked to “FASAH” to maintain the electronic processing and verifying for conformity assessment, and clearance requirements. The importers are required to create accounts on Saber, register their products, and choose one of SASO approved bodies enlisted on Saber platform -like Tabseer- to issue the required certificates of conformity.
After passing the conformity assessment, goods at the Saudi ports can then be cleared.
Ready to get started?
Apply now
Apply now. If you have any questions or inquiries, Tabseer team will help you via all our communication channels, anytime and from all over the world.
SASO Products Certificate of Conformity (PCoC)
The conformity assessment process for the regulated products is a two-phase process:
- Product Certificate of Conformity (PCOC)
- Shipment Certificate of Conformity (SCOC)
The Product Certificate of Conformity (PCoC) is issued in the country of origin by one of the SASO-approved certification bodies. It is valid for one year and for a specific product.
SASO PCoC is required and must be attached to the documents of the shipment to complete clearance when arriving at the Saudi customs ports.
SASO PCoC
Issuance Steps
The Product Certificate of Conformity (PCoC) issuance request must be initiated by the importer through the following steps:
1
Log into Saber electronic platform and add all the required data.
2
Select a certification Body (CB) -like Tabseer- to proceed with the PCoC issuing.
3
Tabseer, an approved certification body designated by the client, ensures reviewing the validity and accuracy of documents.
4
Tabseer cooperates with the client to upload and submit required documents and data.
5
PCoC is electronically issued via Saber.
Tabseer Approval Scope in
Issuing the PCoC
Tabseer issues the Product certificate of Conformity (PCoC) for imported products to the Saudi market from:
- The Middle East and North Africa through our branches in Saudi Arabia and Egypt.
- Europe through our branch in France.
- Asia and Australia through our branch in China.
- The two Americas through our branch in the United States.
Tabseer is approved by SASO to issue the certificate of Conformity (PCoC) in the following technical regulations:
Technical Regulations for Histology Products
Technical Regulation for Food Safety of Tools and Appliances Used in the Kitchen
Technical Regulation for Footwear and their Accessories
Technical Regulation for Building Materials - Part 1: Sectors of Metals and their Alloys for Buildings and Constructions
Technical Regulation for Building Materials - Part 2: Insulation and Building Cladding Materials
Technical Regulation for Building Materials – Part 3: Hydraulic Links and Related Products
Technical Regulation for Building Materials - Part 4: Bricks, Tiles, Ceramics, Sanitary Ware, and Related Products
Technical Regulation for Building Materials Part - 5: Pipes Used in Water, Electricity, and Gas Networks
Technical Regulation for Doors, Windows, and their Accessories
Technical Regulation for Auto Spare Parts
Technical Regulation for Electric Batteries
Technical Regulation for Equipment Safety - Part 1: Portable Equipment and/or Hand-Controlled Machines
Technical Regulations for Machinery Safety – Part 3: Lifting Equipment
Technical Regulations for gas-powered: Appliances and accessories
Technical Regulation for Restriction of Hazardous Substances in Electrical and Electronic Equipment
Technical Regulations for Telecommunications Devices
Technical Regulation for Personal Protective Equipment and Clothing
Technical Regulation for Self-Balancing Boards (Scooter)
Technical Regulation for Paints (Dyes) and Varnishes
Technical Regulations for Detergents
Technical Regulations for Degradable Plastic Products
Technical Regulations for Paper and Cardboard
Technical regulation for low voltage electrical appliances and equipment
Documents Required for
SASO PCoC Issuance
- Conformity Documents: Test reports, quality certificates, risk assessment reports, inspection reports, etc.,
- Technical Documents: Design, dimensions, plans, and specification photo of the products, if applicable.
SASO Product Conformity Assessment Program (PCA)
SALEEM program was launched to maintain the quality and safety of the product through the product conformity assessment program (PCA). This program is under the supervision of SASO. The main purpose of the program is to evaluate, inspect, and certify all imported goods to the Kingdom before placing them in the market.
The Product Conformity Assessment Program is implemented by the Ministry of Commerce and Industry, under the Kingdom efforts to ensure that all consumed products are of high quality and safe for use.
Remarkable Information
About SASO
The Saudi Standards, Metrology and Quality Organization (SASO) is a government organization responsible for setting and managing the standardization activities in the Kingdom. This is in cooperation with the other government organizations and facilities that work in the industry and trade field.
SASO was established based on the Royal Decree No. M/10 dated 03/03/1392 H (17/4/1972 G), to be headed by the Minister of Commerce and investment. All the main sectors related to the standardization field in the Kingdom are represented in the organization.
SASO is authorized to provide legislations, measures, procedures of conformity and compliance that ensure the quality and safety of products placed in the Saudi market. In addition, its vital role is to spread consumer awareness through various activities such as campaigns and workshops that aim to maintain the importance of the quality and safety of the product.
SASO hosts the Saudi Accreditation Committee (SAC), which is the body responsible for accrediting laboratories and certification bodies.
SASO obtained the membership of many significant international standardization organizations such as the International Organization for Standardization (ISO) the International Organization of Legal Metrology (OIML), the International Electrotechnical Commission (IEC), and the International Bureau of Weight and Measures (BIPM).
Tabseer is an approved Certification Body by the Saudi Standards, Metrology and Quality Organization (SASO) to provide all Product Certificate of Conformity (PCoC) services for all low voltage electrical appliances and equipment according to the technical regulations approved by the authority. In addition, we own a professional experienced team and a worldwide network that enables us to provide an unparalleled service in the field of conformity assessment and issuing the required certificates of conformity.
The Importance of
SASO CoC
It is proof that the product is approved by the government represented by SASO, and meets the relevant standards.
It is one of the important required documents to complete clearance at customs ports.
It prevents any delays or rejections when clearing since the product was assessed and certified at the country of origin.
Electronic issuance allows the online check of the authenticity of the certificate.
Ready to get started?
Apply now
Apply now. If you have any questions or inquiries, Tabseer team will help you via all our communication channels, anytime and from all over the world.
SASO Certificate of Conformity (CoC)
