Life-Cycle Assessment (2024)

Introduction
Whole System Mapping
- Whole System Mapping – Exercise
- Whole System Mapping – Examples
Measuring Sustainability
- Life-Cycle Assessment
  - Life Cycle Assessment – Exercise
  - Life Cycle Assessment – Examples
- Cradle to Cradle Certification
  - Cradle to Cradle – Exercise
  - Cradle to Cradle – Examples
- EPEAT Certification
  - EPEAT Certification – Exercise
  - EPEAT Certification – Examples
- SA8000 Labor Certification
  - SA8000 Certification – Exercise
  - SA8000 – Examples
Greener Materials
- Finding Greener Materials
  - Finding Greener Materials – Exercise
  - Finding Greener Materials – Examples
- Swapping in Greener Materials
  - Swapping in Greener Materials – Exercise
  - Swapping in Greener Materials – Examples
Lightweighting
- Lightweighting – Exercise
- Lightweighting – Examples
Circular Economy
- Circular Economy – Exercise
- Circular Economy – Examples
Energy Effectiveness
- Energy Effectiveness – Exercise
- Energy Effectiveness – Examples
Changing Lifestyles
- Green Persuasion – Exercise
- Green Persuasion – Examples
- Evil Persuasion – Exercise
- Evil Persuasion – Examples
Biomimicry
- Biomimicry Mentors
  - Biomimicry Mentors – Exercise
  - Biomimicry Mentors – Examples
- Biomimicry Principles
  - Biomimicry Principles – Exercise
  - Biomimicry Principles – Examples
Integrating into Classes

Content

Life-Cycle Assessment

Goal: Quantify the environmental impacts of your product and compare different scenarios.

One of the best ways to quantify the environmental impacts of your product or service is life-cycle assessment (LCA). A carbon footprint is a kind of LCA that only measures greenhouse gas emissions, but LCAs can quantify and compare many different types of environmental impacts, from carcinogens to land use to mineral depletion and more. The “ReCiPe” methodology measures eighteen impact categories and can graph them all on one scale for the whole life-cycle of your product. The “eco-cost” methodology measures twelve impact categories and graphs them all as financial costs to society (in €). This helps you determine your priorities for green design. For example, here are very rough LCA graphs of typical products in four different product categories:

Rough single-score LCA graphs for four types of products. Image Credit: Faludi MCAD Class 2014.
More pre-calculated LCAs available at ProductDesign.green.

These graphs combine all of the different impact categories mentioned above, to show the biggest opportunities for improvement. For “large electrical” it is reducing energy use or switching to clean energy, and for “housewares and other” (such as furniture), it is choosing better materials and manufacturing methods, etc. However, sometimes the opportunity is not as clear. Notice that in the “often washed apparel” graph, energy and material impacts are similar; in this case, there are large uncertainties for knowing which impact is actually larger.

Watch out: some assumptions can change impacts by orders of magnitude! To avoid this, you can use sensitivity analysis to check your assumptions by trying different inputs or methods. Only trust large differences until you have more precise analyses.

Here is an hour-long video introduction to LCA, describing what it is used for, what is measured, and how to do it:

How To Do LCA

Your estimated LCA for early-stage design will not be rigorous, like the analysis you would need for an Environmental Product Declaration. A properly rigorous LCA can take six months or more to do, but an estimated LCA can take hours. As above, remember rough analyses can have huge uncertainties (such as 30%, 50%, often 100% or more, per datapoint). Only trust large differences until you have more precise analyses. The resources below can be combined with the LCA Exercise so that you can do your own.